It is used for process analysis of molten metal for instantaneous sampling techniques and reinforces quality control.

We manufactures Immersion Samplers in the following shapes:-
Round Samplers   

Oval Samplers  

Dual Thickness Samplers    

Stream Samplers   

Blast furnace samplers   

Immersion Samplers with varying paper tubes lengths up to 2000 mm.

Application:
The sampler is suitable for every steel factory to sample in tundish, ladle and horizontal casting. It has
Features:-
Samples can be obtained within 4 seconds
Samples are easily detachable from the spoon
De-oxidants as per customer requirements (Plain, Aluminium, Titanium, Zirconium)
Zero defect samples (absence of pin holes)

Using Method:-

1.  While taking the sample of molten metal the sampler should be sunk to the depth of 300mm at an angle of 60degree to 65 degree and allowed a stay in time of 5 second.
2. After taking the sample instrument from the furnace, knock it on the ground, so the sample of steel will fall down on the ground.
3. It is best to take a sample when the molten steel temperature is above 1500 C

Note:-
1. When taking a sample, first dig up dregs in order to provide blockage.
2. The depth and time when putting instrument into molten steel should be strictly carried out.