Cored wire Specifications: -

Its diameter is 13 mm & 16 mm. 
Outer coil diameter from 800 up to 1500 mm.
Wire length in coil: 13 mm in diameter- up to 5000 Mtr. Packing: Horizontal / Vertically Iron Caged, Palletized, Polyethylene Sheet Wrapped in each coil.

Wire Injection machine meant for inject cored wire into molten metal in ladle during the non-furnace treatment of steel, cast steel, cast-iron modification, spheroidzaton, desulphurization, introduction of alloying elements and modifying inclusions for Steel Industries.

The equipment was designed for the needs of Large to small metallurgical plants.

APPLICATIONS: -

Inject cored wire, solid Aluminium wire CaSi, Carbon, Sulphur, Boron cored wire.

·For controlling the shape of inclusions.

·To improve fluidity and castability.

·To improve the cleanness and cold ductility for wire drawing.

·To control blowholes and improve machinability.

·Desulphurisation in steel casting.

SALIENT FEATURES:-

Up to 4 strands can be used for cored as well as solid wire with following specification:-

·For cored wire size 6mm to 16 mm in dia.

·For solid wire size up to 16 mm in dia.

·Injection speed 30 - 300 M/min adjustable by variable D.C Drive.

·Velocity control: -1 mtr. /min step

·Can be used to feed wires simultaneously or sequentially at set speed.

·Fully automatic with PLC Control.

·No. of pinch Rolls:- 3 Nos. per strand.

Incase if you are interested in using above machine kindly feel free to contact us.

remso2002@rediffmail.com or call us 0091-9313803431.

It measure directly, precisely and instantly through immersion method the ferrous molten metal temperature measurements, in the production and refining processes of iron, steel and other metals. The tube lengths are: 300 mm, 600mm, 900 mm, 1200 mm, 1500 mm and 1800 mm.

Standard Model - Paper tube ID: 28. 2mm
Miniature Model - Paper tube ID: 18. 2 mm

REMSO’s offers these Thermocouple Tips in ABS and Ceramic body models. Stringent quality controls all through the manufacturing process ensure accuracy of temperature measurement and consistency in the final product.

We can supply you the expendable thermocouple tips as following:

Pt/Pt-13% Rh  ( Type R )

Pt/Pt-10% Rh  ( Type S )

Pt-30% Rh / Pt-6% Rh  ( Type B )

It is use for process analysis of molten metal for instantaneous sampling techniques and reinforces quality control.

We manufactures Immersion Samplers in the following shapes:-
Round Samplers   

Oval Samplers  

Dual Thickness Samplers    

Stream Samplers   

Blast furnace samplers   

Immersion Samplers with varying paper tubes lengths up to 2000 mm.

Application:
The sampler is suitable for every steel factory to sample in tundish, ladle and horizontal casting. It has

Features:-
Samples can be obtained within 4 seconds
Samples are easily detachable from the spoon
De-oxidants as per customer requirements (Plain, Aluminium, Titanium, Zirconium)
Zero defect samples (absence of pin holes)

Using Method :-

1.  When measuring of the sample molten steel should have a bent about 60degree to 65degree then stick into the molten steel. The depth of sticking can be above 350mm, hold for 4 to 6 seconds.

2. After taking the sample instrument from the furnace, knock it on the ground, so the sample of steel will fall down on the ground.

3. It is best to take a sample when the molten steel temperature is above 1500 C

Note:-
1. When taking a sample, first dig up dregs in order to provide blockage.
2. The depth and time when putting instrument into molten steel should be strictly carried out.

(3) NC controlled angle lines with stencil capabilities that can process angle sizes up to 8” X 8” X3/4”

(2) High speed milling machines, 2200 ton, 60ft tandem press brake can create tubular Sections up to 60 ft in length.

Numerous welding stations

On-site galvanizing

Economy

·         Our standards assure best design at lowest possible cost

·         Our standardized substation structures require minimal additional engineering

·         Long established relationship with electrical suppliers

Convenience